1950mAh Removable Lithium-Ion Battery for Seiko Mobile Printers MP-B21L, MP-B30, MP-B30L, MP-A40 by Seiko Instruments BP-A0720-B1-E
- SKU:
- Brand: Seiko Instruments
- Estimated Delivery: 5 Business Days**
- UPC:
- Manufacturer's Warranty: None
- Contents: (1) Lithium-Ion Battery Pack
OEM Original Seiko Instruments Battery for Seiko Mobile Printers MP-A21L, MP-B30, MP-B30L, and MP-A40
Use as a replacement or as a spare battery to ensure your mobile printer is always charged and ready to go. Quick and easy to place the battery in the printer, no tools are required.
This battery can be used with the following Seiko products:
Seiko Mobile Printers: MP-B21L, MP-B30, MP-B30L, MP-A40
Single Battery Charger: PWC-A071-A1
Quad Battery Charger: PWC-A074-A1
[ ! ] We strive to provide our customers with accurate product information. Manufacturers, suppliers, and others provide all product information for this page and we may not have fully verified all information. Product packaging and material may contain more and/or different information from the website. Electronic devices may be subject to Federal Communications Commission's testing, equipment authorization, and device marking and labeling requirements. For additional information about a product, please contact the manufacturer.
[IMPORTANT]
- **Estimated Delivery may require additional time for larger orders dependent on in-stock inventory.
- Check the Compatibility tab below prior to purchase.
- Review our RETURN POLICY
Battery Type: Lithium-Ion
Capacity: 1950mAh
Voltage: 7.4 V
Operating Temperature - printing: -4°F to 122°F (-20°C to 50°C )
Operating Temperature - charging: 32°F to 104°F (0°C to 40°C )
Read the printer User Manual for full instructions and information about the battery.
- Make sure to turn off the printer when installing/removing the battery pack.
- Remove the battery pack from the printer, if the printer will not be used for a long time.
- To prevent the battery pack from falling off, be sure to install and snap the battery pack securely to the printer or battery charger. Dropped battery pack may cause personal injury or malfunction.
- When using the belt clip, be sure to install and snap the battery pack into the printer. If not secure, the belt clip and battery will fall off and could damage the printer or may cause personal injury or malfunction.
- DO NOT charge the battery pack from any printer or battery charger other than the specified printer or specified battery charger.
- The battery pack should be charged at 32°F to 104°F. Be sure to charge the battery pack under the specified temperature range. Otherwise, it may cause leakage, overheating, rupture, or fire.
- DO NOT remove the battery pack during charging.
- Charging time depends on the ambient temperature and the voltage level of the battery pack. Normally, it takes about 4 hours to complete charging after running down the battery pack.
- DO NOT expose the battery pack in a fire or heat it.
- DO NOT leave the battery pack under high temperature conditions such as in scorching heat, inside a car, or near a fire. It may cause leakage, overheating, rupture, or fire.
- DO NOT apply strong impact to the battery pack with a hammer or a nail, and DO NOT crush it.